Heavy Duty Umbrella Stand

Updated: February 18, 2017

Heavy Duty Umbrella Stand on Amazon

Heavy Duty Umbrella Stand

With a heavy-duty umbrella stand, you’ll never have to worry about your garden furniture toppling over in a breeze – interrupting your back yard relaxation.

However, it’s important to make sure that your stand weighs enough to keep a large umbrella in position – and it should tip the scales at about 100 lbs.

Cast iron or steel are excellent materials for a strong umbrella stand.

If you want an umbrella big enough to cover a picnic table and people sitting around it, you will need a heavy base.

They weigh a lot on their own, but with cement or other such material inside, shells need to be tough.

Plastic or other polymers just won’t cut it.

If you want an umbrella big enough to cover a picnic table and people sitting around it, you will need a heavy base, or you’ll be constantly fighting to keep the table and umbrella upright.

A weak umbrella base is an accident in waiting.

General Information About Heavy Duty Umbrella Stands

Are wheels good to have on a heavy base?

Wheels are convenient when moving the stand into position, but they are not absolutely required.

Wheels are convenient when moving the stand into position, but they are not absolutely required. Usually, one person can tilt the base and roll it into position under a table. Getting the stand in the correct spot under the table is the tricky part, and wheels won’t help with that.

Remember, you probably are only going to move the umbrella stand once a season, so paying more for wheels could end up feeling extravagant. A dolly will work great to move a base around on a patio or deck. This method also is less likely to leave parts on the floor surface.

How much wind can a heavy-duty stand handle?

A good stand can handle 60 mph winds, but humans might have trouble in that situation.

Hurricane winds are too much for a heavy-duty stand. Actually, the wind might even rip the umbrella off the stand because the base is so sturdy. A good stand can handle 60 mph winds, but humans might have trouble in that situation. If it’s that windy, closing the umbrella and bringing it inside is advisable.

A well-made stand can handle high winds and tilt umbrellas. If there is any rocking motion in the stand when the umbrella is fully open, then sandbags can be added to help stabilize the base. Usually, these stands are used under a large table, so the sandbags should go unnoticed.

Are the stands adjustable and paintable?

Because of the smooth shape of umbrella stands, and materials of their shells, most are paintable.

Most heavy-duty stands can be adjusted in height to fit under a table. Because they are made of steel or cast iron, they will not wear out or strip quickly. The posts also fit a variety of pole sizes, so check to make sure the measurements line up before putting the base under a table.

Because of the smooth shape of umbrella stands, and materials of their shells, most are paintable. Once a season should be enough. Some of the ornate cast iron models may be difficult to sand before painting because of all the crevices. Using primer after sanding can help the new paint last longer.

Only The Best Heavy Duty Umbrella Stands

Phat Tommy Wheeled Steel Umbrella Base

2-phat-tommy-wheeled-steel-umbrella-baseThe feature that makes this model stands out is the wheels. They can save owners the trouble of pulling out a dolly to move the base from storage to the patio or deck. When the stand is flat, the wheels automatically disengage.

The unit weighs more than 70 pounds, so it should support small or mid-sized umbrellas without tipping over in the wind. The shell is made of weather-resistant steel and is filled with cement. The post can fit a pole up to 1.75 inches in diameter.

It’s much tougher than a plastic model, and there are not many moving parts to wear out.

This stand is 18 inches high and 19 inches wide. It comes in bronze or black. It’s going to be difficult to break the Phat Tommy. It’s much tougher than a plastic model, and there are not many moving parts to wear out.

This is a good umbrella stand for areas with fairly high winds. Because of the quality materials, the unit should last several seasons. Most expensive bases simply add weight. When in doubt, add sandbags to the base for additional stability.

Oakland Living Heavy Duty Umbrella Stand

3-oakland-living-heavy-duty-umbrella-standThis model is cast iron, so it weighs in at more than 50 pounds without any filler. The Oakland Living stand is more attractive than even a steel model, so it would look great under a small patio or deck table.

If you are worried at all about moving the umbrella base, cast your worries aside; one person can easily tilt and roll the umbrella stand across a hard surface. The base can be adjusted in height to accommodate various patio tables.

The hardware on the umbrella stand is durable metal, and the post can handle umbrella poles from 1.5 inches to 2 inches in diameter.

The hardware on the umbrella stand is durable metal, and the post can handle umbrella poles from 1.5 inches to 2 inches in diameter. The unit is 13 inches high and 20 inches wide. It comes with a one-year manufacturer’s warranty.

The shell for the umbrella stand is a powder-coated finish that should last for years, but it can be sanded and painted if desired. Assembling the stand only takes a few minutes, and storing the base unit is a breeze.

Phat Tommy Heavy Duty Steel Umbrella Stand

4-phat-tommy-heavy-duty-steel-umbrella-standWeighing more than 50 pounds, the steel Phat Tommy stand can support serious umbrellas in windy outdoor conditions. The base is filled with cement and comes with two tubes to fit a variety of patio or deck umbrella pole diameters.

Buyers can choose colors including matte white, bronze, black or champagne. Because of its smooth surface, the base is easy to clean with a damp towel. With proper maintenance, the weather-ready Phat Tommy should look great for years to come.

If you are looking to save a little money and are willing to get moderate exercise, this unit can easily be titled and rolled across a hard surface.

If you are looking to save a little money and are willing to get moderate exercise, this unit can easily be titled and rolled across a hard surface. You don’t need wheels or a dolly to position the stand under a table.

A plastic umbrella stand would cost less, but how long would it last before you had to buy a new one? The Phat Tommy is durable and paintable. Chances are the umbrella you put in it will need replacing long before the stand.

In Summary: Heavy Duty Umbrella Stand

When considering an umbrella stand, buyers should consider how much energy and time they are willing to put into handling it.

Quality is worth a little extra money. Not only will a metal umbrella base last longer, it will function better.

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,